widgetolz.blogg.se

Step 3: Click the Wireless tab on the top and then click Wireless Repeater from the menu on the left-hand side.

If you have not changed the default password, this field should be left blank. Get to know more details of each function and configuration please go to Download Center to download the manual of your product.Step 1: Open your Internet browser and enter, or into the address bar.According to Step2 and Step3, we have configured it successfully that: RE450 connects to the main router at 2.4G only and broadcast its wireless signal in 5G only!.Click “Save” to save all the settings. With this settings, RE450 will only broadcast 5GHz wireless network to its clients. Go to Settings- Wireless- Extended Network, Enable “Extended 5GHz” and disable “Extended 2.4GHz”.Please click “Save” to save all the settings. With this settings, RE450 will only connect to the main router in 2.4GHz network. Also we need uncheck 5GHz Network to disable 5G connection to the router. Go to Settings- Wireless- Connect to Network, click “Wireless Scanner” of 2.4G Network, select and connect to the wireless network.Click “Login” to log into the Web GUI of RE450. Note: Please follow this FAQ to log into its Web GUI if you don’t know how to do: How to log into the Web GUI of my Range Extender via IP address or domain name? The default username and password are both “admin”. Log into the Web GUI of RE450 using its domain name: or default IP: 192.168.0.254.Here we take the first High Mode as an example to introduce how to configure High Speed Mode in RE450: There is no independent settings in RE450 to set High Speed Mode but we still have a simple method to set this function.Īs we know, there are two High Speed modes:Ĭonnect to the main router on the 2.4GHz band and connect to your devices on the 5GHz band Ĭonnect to the main router on the 5GHz band and connect to your devices on the 2.4GHz band. Note: Here we just take RE450 as an example.